Radial lip seal for shaftsRotary Shaft Seals
The standard single-lip radial oil seal — steel-cased with a spring-energised elastomer lip that retains lubricant on rotating shafts.
- Temp
- -40°C to +200°C (FKM lip)
- Pressure
- Up to 0.5 bar (standard lip)
SERIES 06 / 0805 product lines
Oil Seals
Rotary shaft lip seals — single, double-lip, spring-loaded and high-pressure types — that retain lubricant and exclude dirt on shafts and bearings.
Radial lip seals that keep oil inSERIES 06 / 08
Capabilities
Performance envelope
An oil seal earns its keep quietly: it keeps the lubricant where it belongs and keeps grit, water and dust out of the bearing. SealGuard radial lip seals pair the right lip elastomer with a precision garter spring and a rigid steel case for consistent radial force as the lip wears. Double-lip designs add a dust excluder for dirty environments, and reinforced high-pressure variants hold film integrity where standard seals would extrude — extending bearing and gearbox life across the plant.
Operating LimitsOil Seals
- Temperatureθ · °C
- -40°C to +200°C (FKM lip)
- PressureP · bar
- Up to 10 bar (high-pressure types)
- Size RangeDN · ⌀
- Shaft Ø6–200 mm · DIN 3760 / 3761 · ISO 6194
- MaterialsMAT
- NBR, FKM and silicone lips; steel / stainless case; stainless garter spring
Product Range05 LINES
Oil Seals lines
Browse the oil seals range, compare the headline limits, and add candidates straight to your quote request.
Radial lip seal for shaftsPressure-rated rotary oil sealHydraulic Seals
A reinforced rotary oil seal built to hold a modest standing pressure on hydraulic pump and motor shafts where standard lip seals would fail.
- Temp
- -30°C to +120°C (NBR) / +200°C (FKM)
- Pressure
- Up to 10 bar (pressure-rated lip)
Constant-force garter-spring sealSpring Loaded Seals
A garter-spring-energised lip seal that maintains constant radial force as the lip wears, for reliable long-life shaft sealing.
- Temp
- -40°C to +200°C (FKM lip)
- Pressure
- Up to 0.5 bar (standard lip)
Dust-excluding twin-lip sealDouble Lip Seals
A twin-lip oil seal whose primary lip retains lubricant while an auxiliary dust lip excludes dirt, water and grit from the bearing.
- Temp
- -40°C to +200°C (FKM lips)
- Pressure
- Up to 0.5 bar (standard lip)
Reinforced seal for pressure shaftsHigh Pressure Oil Seals
A heavily reinforced rotary seal with a fabric- or back-up-supported lip that holds elevated casing pressure on demanding shaft applications.
- Temp
- -40°C to +200°C (FKM lip)
- Pressure
- Up to 10 bar (reinforced lip)
Specification Guidance
Getting the spec right
Field-tested guidance from our engineers on specifying oil seals for demanding service.
- Note 01
Set the lip-to-shaft interference with the garter spring — never run a worn or over-stretched spring.
- Note 02
Fit double-lip seals in dusty, wet or splash environments to protect the bearing from ingress.
- Note 03
Upgrade to FKM lips for high-temperature gearboxes and synthetic-oil service.
- Note 04
Specify a hardened, ground shaft counterface (Ra 0.2–0.5 µm) to achieve rated seal life.
Let’s specify it
Engineer out your next leak.
Send us your service conditions — media, temperature, pressure and motion — and our engineers will specify the seal that holds the line.