Engineered to prevent leaks
Full sheets and rolls of jointing material — compressed fibre, rubber, PTFE, graphite and cork — for fabricating custom gaskets in-house, fast.
When the gasket you need isn't a standard size, you cut it. SealGuard jointing sheets give maintenance and fabrication teams a calibrated, consistent blank to work from — uniform thickness, predictable compressibility and a known temperature and chemical rating across the whole sheet. Stock the grades your plant actually runs, cut to any flange or housing on site, and replace an emergency gasket in minutes instead of waiting on a supplier lead time.
Browse the gasket rolls & sheets range, compare the headline limits, and add candidates straight to your quote request.
Calibrated jointing for fabricationFull sheets of aramid / NBR compressed jointing for cutting custom gaskets in-house, with consistent thickness and a broad service rating.
Elastomer sheet by the metreCommercial and insertion rubber sheet in NBR, EPDM, FKM, silicone and natural rubber for gaskets, linings, pads and seals.
Inert sheet stock for the worst mediaVirgin and filled PTFE sheet for cutting chemically inert gaskets, linings and machined parts that resist almost any process fluid.
High-temperature flexible graphiteReinforced flexible-graphite sheet that seals to +650°C in steam, holding the line where fibre and elastomer jointing break down.
Conformable cork-rubber jointingCork-rubber composite sheet that conforms under low clamping load to seal oils and fuels on covers, pans and transformer joints.
Field-tested guidance from our engineers on specifying gasket rolls & sheets for demanding service.
Select sheet thickness for the flange surface finish — thinner sheets seal better on smooth, rigid faces.
Reinforce flexible graphite with a tanged 316 insert where blow-out resistance and handling strength matter.
Reserve cork-rubber for low-pressure oil and fuel covers where conformability beats raw strength.
Keep an FDA / WRAS-approved rubber grade on hand for potable-water and hygienic gasket fabrication.
Send us your service conditions — media, temperature, pressure and motion — and our engineers will specify the seal that holds the line.
