Rubber Sheets

Elastomer sheet by the metre

Commercial and insertion rubber sheet in NBR, EPDM, FKM, silicone and natural rubber for gaskets, linings, pads and seals.

Full elastomer range matched to oils, water or chemicals
Plain or fabric-inserted for added tensile strength
WRAS potable-water and FDA food-contact grades
Supplied in sheets or continuous rolls
Defined hardness and surface finish per grade

Temperature: -50°C to +200°C (compound dependent)
Pressure: Up to 25 bar (gasket duty, thickness dependent)
pH range: 2 – 12 (compound dependent)

Rolls of NBR, EPDM and silicone rubber sheet in black and red — Gasket Rolls & SheetsREF · rubber-sheet

Technical DatasheetSPEC

The numbers, on the record

Every figure below is the specification we hold ourselves to — material, service envelope, media compatibility and conformance. Download it as a standalone document for your dossier.

SealGuard

Technical Datasheet

Doc No.: DS-RUBBER-SHEET
Revision: Rev. A
Issue: 2026-Q3
Class: Gasket Rolls & Sheets

Rubber Sheets

Elastomer sheet by the metre

01

Material & Construction

Calendered elastomer sheet — NBR, EPDM, FKM, silicone or natural rubber

02

Service Envelope

Temperature range	-50°C to +200°C (compound dependent)
Pressure rating	Up to 25 bar (gasket duty, thickness dependent)
pH range	2 – 12 (compound dependent)

03

Media Compatibility

WaterMineral oilsDilute acids & alkalisFoodstuffs

04

Dimensions & Sizing

Rolls 1.2–1.4 m wide · 1.5–10 mm thickness · plain or insertion

05

Standards & Conformance

BS 2752
ASTM D2000
ISO 1817

06

Certifications

ISO 9001
WRAS (EPDM)
FDA 21 CFR 177 (silicone)

07

Additional Specifications

Hardness	40–80 Shore A (grade dependent)
Tensile strength	5–20 MPa (compound dependent)

Insertion	Plain or 1–3 ply fabric
Finish	Smooth, fine-fabric or cloth impression

Specify & QuoteORDER

Build your line item

Choose the material grade and size that match your duty, set a quantity, and add a fully-specified line to your quote. No prices, no obligation — our engineers confirm specification and lead time on every enquiry.

01

Material grades

NBR / nitrile (oil resistant)
EPDM (water & weather, WRAS)
FKM / Viton® (chemical)
Silicone (hygienic / high temperature, FDA)
Natural rubber (abrasion / resilience)

02

Sizes & configurations

1.4 m wide rolls (10 m)
1.2 × 10 m rolls
1.5 / 3 / 6 / 10 mm thickness
Plain or fabric-inserted
Self-adhesive backed option
Slit strips to width

In ServiceUSE

Where it holds the line

Rubber sheet is the most flexible raw material in the workshop — gaskets, anti-vibration pads, tank linings, splash guards and bespoke seals all start here. SealGuard stocks the elastomer that fits the job: oil-resistant NBR, water- and weather-resistant EPDM, chemical-grade FKM, hygienic and heat-stable silicone, and high-resilience natural rubber. Plain or fabric-inserted, supplied in sheets or rolls, every grade carries a defined hardness and service rating so the part you cut behaves predictably.

Typical applications

01Cut gaskets, washers and seals
02Anti-vibration and machinery mounting pads
03Tank, chute and hopper linings
04Splash guards and skirting
05Potable-water and hygienic components

Industries served

The rest of gasket rolls & sheets

View all Gasket Rolls & Sheets

Compressed Non-Asbestos Sheets

Calibrated jointing for fabrication

Full sheets of aramid / NBR compressed jointing for cutting custom gaskets in-house, with consistent thickness and a broad service rating.

View product

PTFE Sheets

Inert sheet stock for the worst media

Virgin and filled PTFE sheet for cutting chemically inert gaskets, linings and machined parts that resist almost any process fluid.

View product

Graphite Sheets

High-temperature flexible graphite

Reinforced flexible-graphite sheet that seals to +650°C in steam, holding the line where fibre and elastomer jointing break down.

View product

Cork Sheets

Conformable cork-rubber jointing

Cork-rubber composite sheet that conforms under low clamping load to seal oils and fuels on covers, pans and transformer joints.

View product

Let’s specify it

Specify this seal for your service.

Send us the media, temperature, pressure and motion for your duty and our engineers will confirm the right material grade, size and standard for your application.

Request a QuoteFind Your Seal