Compressed Non-Asbestos Sheets

Calibrated jointing for fabrication

Full sheets of aramid / NBR compressed jointing for cutting custom gaskets in-house, with consistent thickness and a broad service rating.

Uniform thickness and density for consistent cut gaskets
Broad rating across oils, steam, water and mild chemicals
Graphite anti-stick finish for clean release
Asbestos-free, fully documented jointing
Stocked in multiple thicknesses for any flange

Temperature: -50°C to +400°C
Pressure: Up to 100 bar · PN100
pH range: 1 – 13

Full sheet of compressed non-asbestos jointing with a graphite-finished surface — Gasket Rolls & SheetsREF · compressed-non-asbestos-sheet

Technical DatasheetSPEC

The numbers, on the record

Every figure below is the specification we hold ourselves to — material, service envelope, media compatibility and conformance. Download it as a standalone document for your dossier.

SealGuard

Technical Datasheet

Doc No.: DS-COMPRESSED-NON-ASBESTOS-SHEET
Revision: Rev. A
Issue: 2026-Q3
Class: Gasket Rolls & Sheets

Compressed Non-Asbestos Sheets

Calibrated jointing for fabrication

01

Material & Construction

Aramid and inorganic fibre bound in a nitrile (NBR) elastomer matrix

02

Service Envelope

Temperature range	-50°C to +400°C
Pressure rating	Up to 100 bar · PN100
pH range	1 – 13

03

Media Compatibility

Mineral oilsSteamWaterFuelsMild acids & alkalis

04

Dimensions & Sizing

1500×1500 / 2000×1000 mm sheets · 0.8–3.0 mm thickness · slit rolls to order

05

Standards & Conformance

DIN 28091-2
BS 7531 Grade Y
EN 1514-1

06

Certifications

ISO 9001
Asbestos-free declaration
DNV type-approved

07

Additional Specifications

Density	1.6–1.9 g/cm³
Recovery	≥ 50%

Compressibility (ASTM F36)	7–13%
Finish	Graphite anti-stick both faces

Specify & QuoteORDER

Build your line item

Choose the material grade and size that match your duty, set a quantity, and add a fully-specified line to your quote. No prices, no obligation — our engineers confirm specification and lead time on every enquiry.

01

Material grades

Aramid fibre / NBR binder
Carbon fibre / NBR (chemical grade)
Glass fibre / NBR (high temperature)
Graphite-faced aramid / NBR
SBR-bound economy grade

02

Sizes & configurations

1500 × 1500 mm sheet
2000 × 1000 mm sheet
0.8 / 1.0 / 1.5 / 2.0 / 3.0 mm thick
Half-sheet quantities
Slit rolls / strips
Pre-cut blanks to drawing

In ServiceUSE

Where it holds the line

A full sheet of compressed non-asbestos jointing is the most versatile material on a fabrication bench. Aramid and inorganic fibres bound in nitrile give uniform compressibility and recovery across the whole sheet, so every gasket you cut performs the same. With a broad oil, steam, water and mild-chemical rating and a graphite anti-stick finish for clean release, it lets maintenance teams turn out a tight, traceable gasket for almost any service flange in minutes.

Typical applications

01In-house custom gasket fabrication
02Emergency flange gasket replacement
03Steam, condensate and water service
04Oil, fuel and lubricant systems
05Pump and valve cover gaskets

Industries served

The rest of gasket rolls & sheets

View all Gasket Rolls & Sheets

Rubber Sheets

Elastomer sheet by the metre

Commercial and insertion rubber sheet in NBR, EPDM, FKM, silicone and natural rubber for gaskets, linings, pads and seals.

View product

PTFE Sheets

Inert sheet stock for the worst media

Virgin and filled PTFE sheet for cutting chemically inert gaskets, linings and machined parts that resist almost any process fluid.

View product

Graphite Sheets

High-temperature flexible graphite

Reinforced flexible-graphite sheet that seals to +650°C in steam, holding the line where fibre and elastomer jointing break down.

View product

Cork Sheets

Conformable cork-rubber jointing

Cork-rubber composite sheet that conforms under low clamping load to seal oils and fuels on covers, pans and transformer joints.

View product

Let’s specify it

Specify this seal for your service.

Send us the media, temperature, pressure and motion for your duty and our engineers will confirm the right material grade, size and standard for your application.

Request a QuoteFind Your Seal