Skip to content
SEALGUARD
Hydraulic Seals

V-Rings

Stacked chevron packing set

Adjustable V-section (chevron) packing sets that stack to seal very high pressures on hydraulic rods and reciprocating plungers.

  • Stacked chevron rings share very high pressure loads
  • Add rings for more pressure; adjust gland to set
  • Fabric-reinforced and PTFE rings for strength and low friction
  • Individually replaceable rings reduce waste
  • Adapts to rod or plunger of any practical diameter
Temperature
-30°C to +200°C (PTFE rings)
Pressure
Up to 700 bar (stacked set)
pH range
2 – 12
Chevron V-ring packing set with male and female adapters
Hydraulic SealsREF · v-ring
Technical DatasheetSPEC

The numbers, on the record

Every figure below is the specification we hold ourselves to — material, service envelope, media compatibility and conformance. Download it as a standalone document for your dossier.

SealGuard

Technical Datasheet

Doc No.
DS-V-RING
Revision
Rev. A
Issue
2026-Q3
Class
Hydraulic Seals

V-Rings

Stacked chevron packing set

01

Material & Construction

Fabric-reinforced elastomer and/or PTFE V-section rings with adapter rings

02

Service Envelope

Temperature range-30°C to +200°C (PTFE rings)
Pressure ratingUp to 700 bar (stacked set)
pH range2 – 12
03

Media Compatibility

Hydraulic oilsWater & emulsionsMild chemicalsMineral oils
04

Dimensions & Sizing

Rod / plunger Ø10–300 mm · 3–7 ring stacks · metric & inch

05

Standards & Conformance

  • ISO 5597
  • DIN equivalents
06

Certifications

  • ISO 9001
  • RoHS / REACH
07

Additional Specifications

ConstructionNested V-section (chevron) stack
Max speed0.5 m/s reciprocating
AdjustmentGland depth sets working compression
MaintenanceIndividually replaceable rings

Data is typical and for guidance only — confirm suitability against your service conditions. V-Rings · DS-V-RING · Rev. A.

Specify & QuoteORDER

Build your line item

Choose the material grade and size that match your duty, set a quantity, and add a fully-specified line to your quote. No prices, no obligation — our engineers confirm specification and lead time on every enquiry.

01

Material grades

  • Fabric-reinforced NBR chevrons
  • Fabric-reinforced FKM chevrons (high temp)
  • PTFE / fabric composite chevrons
  • Polyurethane V-rings
  • Mixed elastomer + PTFE adapter set
02

Sizes & configurations

  • Rod / plunger Ø10–300 mm
  • 3 / 5 / 7-ring stacks
  • With male & female adapters
  • Metric & inch sizes
  • Fabric or PTFE ring selection
  • Custom stack height to drawing
Configure your lineRFQ

In ServiceUSE

Where it holds the line

For the highest reciprocating pressures, V-ring chevron packing remains unbeaten. Multiple nested V-section rings, capped by a male and female adapter, stack in the gland and share the pressure load between them — add rings for more pressure, adjust gland depth to set the seal. Fabric-reinforced elastomer and PTFE rings combine strength with low friction, and worn rings can be replaced individually. It is the proven choice for high-pressure presses, plungers and reciprocating pumps.

Typical applications

  • 01High-pressure hydraulic presses
  • 02Reciprocating plunger pumps
  • 03Heavy industrial cylinders
  • 04Ram and forging equipment
  • 05High-pressure water-jet plungers

Industries served

Let’s specify it

Specify this seal for your service.

Send us the media, temperature, pressure and motion for your duty and our engineers will confirm the right material grade, size and standard for your application.